Barco CM50 Installation Manual - Ceiling Mount Cm50
Date : 25/10/95 R9827990-1
Ceiling Mount CM50
R9827990
R9827991
14
Mounting Instructions
Configuration C
(continued)
A
Supporting
axle
Bolt A
Pulley
cable
Pull on the cord to lift up the projector. Pull until
the cone clicks securely into the lock holder
system.
Check if the projector is well locked by loosen-
ing the cord a little.
If the projector is well locked, rotate the projec-
tor a little to the left or to the right until the
projector axis is perpendicular with the screen.
Secure this position with the four tube bolts A.
Lifting up the projector
Safety precautions :
- Standing under the projector
while lifting is dangerous and
must be avoided !
- Lifting up the projector has to be
done very slowly to avoid sway-
ing.
- Persons not involved with the
installation have to be kept out
of the working area.
After all safety precautions have
been taken, proceed to lift up the
projector.