Baroness LM2700 Operator's Manual - page 7
−6−
To use the Baroness mower safely
The following precautions should always be followed to operate the Baroness mower safely.
Warnings for Safety
Warning symbols
have been attached to this machine to ensure that you can operate it
safely.
The warning symbols indicate items which are particularly important for your safety. It is
important to always follow the warnings and operate the machine with safety.
Warning symbols
Refer to the
operator's manual.
Caution symbol
(Pinch)
Fuel
(No.2 Diesel fuel only)
Danger symbol
(Danger-flammables)
Caution symbol
(V-belt/rotating parts)
Danger symbol
(Flying objects)
Caution symbol
(Pinch)
Caution symbol
(Entanglement)
Danger symbol
(Cutting of hand or foot)
Danger symbol
(Cutting of finger)
· · ·
· · ·
· · ·
· · ·
· · ·
· · ·
· · ·
· · ·
· · ·
· · ·
· · ·
· · ·
Warning symbol
(High-pressure oil)
Warning symbol
safty clothes
Danger symbol catching
of hand or foot
Caution symbol
(Hot surface)
Warning symbol
(Caution-exhaust gas)
Warning symbol
(Overturn, fall)
· · ·
· · ·
· · ·
· · ·
Grease
· · ·
Danger
• • • This symbol indicates that serious injury or death will
occur if the warning is ignored.
Warning
• • • This symbol indicates that serious injury or death could
occur if the warning is ignored.
Caution
• • • This symbol indicates that an injury or damage to
property may occur if the caution is ignored.
Maintenance and storage
4.
Park the machine on the flat ground.
N
Never let indisciplined person fit out the machine.
N
Check that all nuts, bolts, and screws are properly tightened to ensure that the mower is
N
always working under safe conditions.
To prevent a fire, keep the engine, muffler, and battery areas free of excessive grease,
N
grass, leaves, and dust.
Check the grass catcher frequently for preventing wear or damage.
N
Keep all parts of the mower in good working condition and all fasteners and hydraulic
N
fittings tightened.
If the fuel tank needs to be cleaned, clean it outdoors.
N
Take care not to pinch your fingers etc. while making adjustments to the mower.
N
For mowers equipped with multiple reel cutters, take care as rotating one reel cutter can
N
cause other reel cutters to rotate.
Before servicing or adjusting the mower, stop the mower, stop the cutting units, set the
N
parking brake, turn the engine off, and remove the key (for gasoline engines, disconnect
the spark plug lead). Be sure to check that each part has completely stopped operating
before servicing or adjusting the mower.
When necessary, use a jack to securely support the mower.
N
Take care when removing equipment, the spring or oil pressure that have applied to it
N
could be suddenly free.
When servicing the mower, disconnect the battery lead. To disconnect the battery,
N
disconnect the negative battery cable first, then the positive battery cable. To connect
the battery, connect the positive battery cable first.
When checking the reel cutters, wear gloves or wrap the reel cutters in thick cloth to
N
avoid injury.
Keep hands and feet away from moving parts. If possible, avoid making any
N
adjustments while the engine is running.
Charge the battery in a well ventilated area, away from sparks and flames. Unplug the
N
battery charger before connecting or disconnecting it to the battery. Also, wear
protective clothing and use insulated tools.
Be sure to empty the fuel tank, and keep apart from the fire origin, when storaging the
N
machine indoors where using spark or naked flame.
Check the engine cool down enough, when storaging the machine in the shutted place.
N
Lower the mowing unit when storaging the machine. In case to store the machine with
N
raising the outermost #4 and #5 mowers, be sure to latch them.