Bartington PSU1 Operation Manual - page 10
Manual is about: Bartington PSU1 Power Supply Unit Operation Manual
of
20
BARTINGTON INSTRUMENT
Page 8 of 16
OM2443 ISSUE 1.0
Installing the PSU1
Installing and Replacing the Internal Batteries
The battery cells for the PSU1 are not installed before shipping. To install the batteries cells for first use (or
to replace defective cells) use the following procedure:
Key:
A – Enclosure lid retaining screw
B – Enclosure lid retaining screw
C – Earth lead fixing (do not remove)
1. Place the PSU1 on a suitable surface with the underside facing up and the two enclosure lid
retaining screws nearest to you.
2. Using a flat-bladed screwdriver of the appropriate size, fully loosen screw A to allow the edge of
the lid to clear the enclosure end cap.
A
B
C