Bartscher SMART IP24 Instruction Manual - 6.1 Safety Advice
- 25 -
WARNING! Danger of burns!
When in use the heater gets very hot!
To avoid burns, never adjust the tilt angle when the unit is in use!
•
In order to set heat emission according to individual needs, we recommend attaching
a power adjustment control dial (not included with shipped assortment). Control dial
can be purchased separately:
Power control dial
Used to regulate individual heating settings
Used to regulate individual heating settings
Used to regulate individual heating settings
Used to regulate individual heating settings
Bartscher item #: 825.210
6. Cleaning and maintenance
6.1 Safety advice
o
Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down
(approx. 15 min.).
o
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables
and the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must
not use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o
Unplug device from power outlet (remove plug from receptacle!)
o
First, allow device to cool off.
o
Dry-wipe device casing.
o
Do not touch heating tubes with fingers because spots and damages may result.
o
Regularly cleanse reflector externally, using a brush.
o
To finish: use soft cloth, never use scrubbing or caustic detergents which can
damage the surface of the device.