Bartscher SMART IP24 Instruction Manual - 5.1 Safety Instructions
- 22 -
5. Installation and operation
5.1 Safety instructions
WARNING! Electrical hazard!
The device must only be connected to a properly installed single socket with
protective contact.
Never yank cord to disconnect from outlet.
Cable must not touch any hot parts.
•
Never touch device with wet or moist hands.
•
Never touch device parts under voltage! Life hazard!
•
Do not use device in case of performance failure, damage or incidence of tipping
over.
•
Do not use accessories or replacement parts which are not authorized by the
producer. These could pose a risk of injury to the user or cause device failure,
moreover, the warranty is made null.
•
Do not expose the device to extreme weather conditions (tempest, rain, snowfall,
storm etc. ).
•
Caution! Do not place any external objects into the apertures of the device! Injury
hazard (electrocution) and damage to the device!
•
Caution! Do not gaze into the bright light emitting device apertures!
•
Do not cover device with cloths, towels, clothing items or any other such items
meant for drying! Overheating risk and fire hazard!
•
Do not wind the power cord onto the device. Never use device with the power cord
wound around device.
•
Allow device to cool off before moving and storage!
WARNING
! Burn hazard!
The casing and safety cage get very hot when the unit is in use! To avoid burns,
place the unit in a location that will prevent accidental contact.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!