Bism Dive Demo Solis Operating Manual - page 52
LOG MODE ( LOG )
■
L-2
L-2 screen displays the following information.
・
Maximum depth
・
Average depth
・
Warning occurred
Depress A button to display “L-3” screen.
■
Warning to be recorded in log.
There are 6 warning as follows;
○Ascent Rate Warning ↑SLOW When the ascent rate exceeds 10m/minute, and the
ascent rate warning is given twice continuously.
○Decompression Dive DECO Mark When the no-decompression time is exceeded,
Warning Lighting and decompression stop becomes necessary.
○Decompression Stop ↓DOWN When the depth becomes less than the
Violation Warning decompression stop depth required while under
decompression stop.
○High Partial Pressure ! ! PO2 When the partial pressure of oxygen becomes 1.4
of Oxygen Alarm or more.
(High PO2 Alarm)
○High Oxygen Accumulation ! ! O2 When the oxygen accumulation exceeds
Alarm (High O2 Alarm) dangerous level.
○Violation Gauge Warning LIMIT When the depth exceeds 99.9m.
When the elapsed dive time exceeds 599 minutes.
When decompression is needed at the depth of
deeper than 33m while decompression diving.
Average Depth
Maximum Depth
●When it displays the depth in the Log Mode, if the depth is less than 50m, it becomes 0.2m
unit, and is deeper than 50m, it becomes 0.4m unit.
52