Bism Dive Demo Solis Operating Manual - page 82
TROUBLESHOOTING
The current time
display is off by hours.
Your Home City setting may be wrong. Check your Home City setting.
Please refer to “Home City and Summer Time Setting” (Page 21).
The current time
display is off by one
hour.
Check your summer time (DST) setting and adjust it if necessary.
Please refer to “Home City and Summer Time Setting” (Page 21).
“ERR” is displayed on
the screen while using
a sensor.
When sensor or internal circuitry is damaged, “ERR” (error) is displayed
on the screen and sensor operation is disabled.
・
If “ERR” is displayed while a measurement operation is being
performed, restart the measurement. If “ERR” is displayed again,
sensor malfunction is considered.
・
When “ERR” does not disappear, sensor trouble is considered.
Please consult with your original dealer.
“ERR” is displayed
after having performed
bidirectional calibration
If “ERR” is displayed after showing the calibration screen, sensor
malfunction is considered.
・
When “ERR” disappears in about 1 second, try to perform the
calibration again.
・
When “ERR” does not disappear, please consult with your original
dealer.
Correct compass
measurement cannot
be performed.
・
Bidirectional calibration is not performed correctly.
Please refer to “Calibrate a Bearing Sensor” (Page 61).
・
Nearby source of strong magnetism, such as a home appliance, a
large steel bridge, a steel beam, overhead wires, move away from large
metal objects. Also compass measurement cannot be performed inside
a train, boat, etc.
Please refer to “Precautions at Digital Compass Measurement” (Page
63).
82
CAUSES AND MEASURES
SITUATIONS