Bism Dive Demo Solis Operating Manual - page 62

●If nothing is operated for 2 to 3 minutes, the display of the direction abbreviation and angle 

value switches to “---”, finishes calibration screen automatically in 2 to 3 minutes after, and 

returns to Watch Mode, Surface Mode or Dive Mode.

DIRECTION READING ( COMP )  

■

Bidirectional Calibration

 1.Continue to depress A button for more than 2 seconds in Digital Compass Mode.

・

Release the button if “CALIBRATION” “-1-“ is displayed after “SET” “Hold” flashes  

“CALIBRATION” is displayed as flowing.

 2. epress L button.

・

It starts to calibrate the first direction.

・

“---“ is shown on the display while calibration is being performed.

・

When calibration is successful, display shows “Turn 180°”, then “CALIBRATION” “-2-“ is 

    displayed.

・

When “ERR” “-1-“ is displayed, please repeat the same procedure by depressing L button 

    again.

 3. Rotate the product 180 degrees.

 4. Depress L button.

・

It starts to calibrate the second direction.

・

“---“ is shown on the display while calibration is being performed.

・

When calibration is successful, display shows “OK”, then it switches to digital compass 

    measurement.

・

Calibration is completed.

・

When “ERR” “-2-“ is displayed, please repeat the same procedure starting from 2.

62