Bism Dive Demo Solis Operating Manual - page 84

MAINTENANCE

■

How to maintain this product.

You wear a Dive Computer directly on your body like clothing. In order to use it for a long time, 

please wipe off any dirt, sweat and water, etc. frequently with a soft cloth. Use this product by 

keeping it always clean.

When sea water and mud stick, please wash away well with fresh water. Especially after diving 

in sea water, please wash away well after dipping in fresh water for a while.

When you find abnormalities on belt such as no elasticity, cracking, discoloration, slack, and 

running out / falling out of the pin of a buckle, please stop use. Please consult with your original 

dealer on check, repair, or exchange with a new belt.

Scrub and wash the metallic portion of a metal belt and a plastic belt with a soft toothbrush 

by using thinned neutral detergent with water and soapsuds. Then, please rinse a detergent 

ingredient well with water and wipe off the water with soft hygroscopic cloth. Also, when you 

wash, please keep detergent and soapsuds away from the body by rolling “kitchen wrap” around 

the body.

Please wash the plastic belt with water and wipe off the water with soft cloth. Although a pattern 

like a spot may come out on the surface of a plastic belt, it does not have the influence on a 

human body and clothing. Please wipe off with cloth.

If a button is not operated for a long period of time, a motion may worsen. Please touch a button 

sometimes. 

In order to maintain waterproof performance, we recommend you a periodical airtight inspection 

(standard is 2 to 3 years). When a problem of airtightness is revealed in the airtight inspection, 

please ask your original dealer for maintenance service, such as exchange of packing seal.

84