Bulldog Scrubbers SS20 User manual

Manual is about: Walk-Behind Scrubber Traction Drive Cylindrical Deck

Summary of SS20

  • Page 1

    User manual walk-behind scrubber traction drive cylindrical deck www.Bulldogscrubbers.Com 877-292-3935 ss20 factory cleaning equipment, inc. 800-793-3790 www.Thesweeper.Com.

  • Page 2

    2 this manual is furnished with each new floor scrubber . This provides the necessary operating and preventive maintenance instructions. Operators must read and understand this manual before operating or servicing this machine. This machine was designed to give you excellent performance and effi cie...

  • Page 3

    3 safety instructions ................................................................................................................... 4 important safety instructions ................................................................................ 4 for safety during operation ......................

  • Page 4

    4 safety instructions important safety instructions operators must read and understand this manual before operating or maintaining this machine. Do not operate this machine in fl ammable or explosive areas. This machine is designed solely for scrubbing dirt and dust in an indoor environment. The man...

  • Page 5

    5 machine overview machine overview - front a cup holder b solution fill port c recovery tank lid d recovery tank e brush deck f front wheel (see note) g rear caster h solution tank * note - front tires are foam fi lled to be maintenance-free. No air can be added. Machine overview - rear a bail hand...

  • Page 6

    6 machine overview a bail handle b handle adjustment knob c key switch d direction switch e squeegee lift lever f battery / fault gauge g speed control h charge status indicator i solution control lever controls bail handle (a) when the scrub deck is lowered to the fl oor, the bail handle enables th...

  • Page 7

    7 machine overview the manufacturer offers an optional hour meter for the floor scrubber. The optional kit replaces the power cord mounting bracket at the rear of the machine with one that contains an hour meter, which records the brush motor operating time. Kit# k-e1720hm optional hour meter circui...

  • Page 8

    8 machine overview when an error or fault occurs within the machine, a fault code will appear on the battery gauge represented by a specifi ed number of fl ashing leds. (see “trouble- shooting” for further information) diagnostic code guide diagnostic codes the number of fl ashing bars on the batter...

  • Page 9

    9 machine overview solution tank drain hose the solution tank may be drained by removing the solution tank drain hose (a) from the hose barb (b) and routing the hose to a fl oor drain. A b solution level indicator the solution tank drain hose also serves as a water level indicator for the solution t...

  • Page 10

    10 machine overview screened float if the recovery tank (c) is overfi lled or a large amount of foaming is present, the screened fl oat (b) blocks the vacuum intake inside the tank protecting the vacuum motor and internal electronics from water damage. It is essential to keep the fl oat in working o...

  • Page 11

    11 machine overview the pump and solution solenoid, which shuts off solution fl ow when the bail handle is released, are protected from debris by the in-line fi lter assembly. The fi lter assembly is located at the front of the machine above the brush deck. It is important to check and clean the scr...

  • Page 12

    12 machine overview a b b a 2 1 squeegee blades angle adjustment the angle adjustment is the decisive factor in ensuring that the squeegee blades on the squeegee lie evenly on the fl oor. 1. Park the machine on a level surface and lower the squeegee. 2. Loosen the lower wing nut (b) on the ad- justi...

  • Page 13

    13 machine overview brush deck maintenance spray jet maintenance the spray jets deliver solution to the fl oor. The spray tip should be cleaned weekly to ensure good cleaning results. To install to remove figure 1 figure 2 figure 3 spray tip removal and installation for cleaning 1. Remove knob locat...

  • Page 14

    14 this machine was designed with total operator comfort and ease of use in mind. All machine components have been designed as a total system to effi ciently clean dirty fl oors. Please contact your representative for specifi c recommendations for the correct brush type and chemical applications. Be...

  • Page 15

    15 machine operation to turn on machine: turn key to operate position ( i ). Wait for battery gauge to stop fl ashing. (if fl ashing continues, see troubleshooting guide) to turn on vacuum: lower squeegee into operating position, vacuum motor will turn on automatically. To turn on brush motor: lower...

  • Page 16

    16 maintenance have a qualifi ed service technician check the vacuum motor carbon motor brushes once a year or after 300 operating hours. The brush motor and transaxle motor carbon brushes should be checked every 500 hours or once a year. Note: refer to the service manual for more detail on maintena...

  • Page 17

    17 troubleshooting problem possible cause remedy worn or torn squeegee blades rotate or replace blades recovery tank full empty recovery tank recovery tank drain hose leak secure drain hose cap or replace poor water pick up recovery tank lid gasket leak replace gasket lid cover properly debris caugh...

  • Page 18

    18 troubleshooting the battery needs charging, there is a bad connection to the battery or dependent on programming, may indicate that the battery lockout function is active and the controller is in a restricted mode of operation. Check the connections to the battery. If the connections are good, tr...

  • Page 19: Warranty

    Warranty bulldog scrubbers warrants to the original purchaser/user that the product is free from defects in workmanship and materials under normal use. Bulldog scrubbers will, at its option, repair or replace without charge, parts that fail under normal use and service when operated and maintained i...

  • Page 20: Warranty

    Warranty model parts labor poly travel bd20 brush drive battery scrubber 3yr 1yr 10yr 90 wd20 wheel drive battery scrubber 3yr 1yr 10yr 90 wd26 wheel drive battery scrubber 3yr 1yr 10yr 90 ss20 sweep scrub battery scrubber 3yr 1yr 10yr 90 description parts labor poly travel battery operated group 3y...

  • Page 21

    Rev * 12/09 www.Bulldogscrubbers.Com 877-292-3935 factory cleaning equipment, inc. 800-793-3790 www.Thesweeper.Com.