Bullet DVR Multi- Cam V2.0 User Manual - page 11
user`s manual
user`s manual
Product appearance and specifications are subject to change without notice
11
Configure:
This tab will take you to the various configuration settings
available and allow you to change the many parameters of the DVR. When you
open the configure section, you will be presented with 6 more sub-categories,
all of which let you further define the settings. Make sure to click on the
checkbox
after you are done making changes, to register your new settings
and close the opened window.
Click on the Cancel box
to close without saving.
Video Standard: Change the video standard for different countries. NTSC is used
primarily in the USA and Canada, while PAL is used mostly in Europe. There are
other standards available, which you can select by using the pull-down menu on
the right side.
Recording Setting: There are 3 modes available, used for different purposes.
Normal mode is selected by default, and intended for most users. The other two
cycle modes are generally used for other applications, such as surveillance video.
Normal mode records continuously, but the file size limit is 2Gb. When this limit is
reached, a new file will be created on the CF memory card, starting from where
the previous file ended. You can store as many files as the capacity of the CF card is
able to hold. During post-production, you can simply place each file one after the
other to create one large continuous video.
Cycle (Single File) records continuously, but when the 2Gb limit is reached, it will
overwrite the current file, starting from the beginning. You cannot store more
than one file with this setting, so if the CF memory card is bigger than 2Gb, you
will not be able to use it completely.
Cycle (Disk) is similar to Normal mode, and will record many files of 2Gb
maximum each, one after the other. Except once the total capacity of the card is
reached, it will overwrite the previous files, starting with the oldest recording on
the card.
Warning: When the Bullet DVR is set to Cycle recording mode, any video file
already present on the CF memory card will be deleted at startup.