Bullet DVR Multi- Cam V2.0 User Manual - page 14
user`s manual
user`s manual
user`s manual
Product appearance and specifications are subject to change without notice
14
On Screen Display: When enabled, the lap timer information will appear on screen, over the recorded video. You
can change the location where the information will be displayed, using the Display Position window below.
Split Signal Same as Beacon: Select this option when you need to setup split timing, when you only have
main beacons available. This will let you use the same IR frequency for both main and split beacons, the only
difference being that the first beacon will be automatically recognized as the main unit, and all others will be set
as split.
If you want the Bullet DVR to differentiate between the main beacon and other split beacons, you will need to
purchase true split beacons, and disable this option.
Display Summary after Stop: When enabled, the OSD information will be displayed briefly at the end of your
recorded video.
Split Count: Allows you to select the number of split beacons which are positioned on the racetrack. The
maximum allowed is one main beacon and up to 4 split beacons.
Mask Time: Set the amount of time where the lap timer will be inactive, so that the IR receiver does not pick-up
the signal of another beacon positioned nearby.
Display Position: Allows you to manually set where the Lap Timer data will be displayed on your TV screen.
The coordinates are defined horizontally by the X value and vertically by the Y value. The numbers correspond to
the number of pixels which are visible on the screen:
NTSC = 720x480 pixels (X value can be set from 0 to 720, Y value 0 to 480)
PAL = 720x576 pixels (X value can be set from 0 to 720, Y value 0 to 576)
Driver Information: Configure the 4 fields to change the names and information related to the recorded event,
for later reference.
About the Lap Timer feature
:
o The Driver Information fields and Lap times will be saved to the
CF memory card, in the file named DVR_xxx.txt The file name may differ, if the user
changed the default file name in the program.
o When the Lap Timer option is enabled, the Time Stamp option will be automatically
turned off. They cannot work both at the same time.
o The Lap Timer feature (when set to enabled) will start to work whenever the IR receiver
crosses the path of a compatible beacon.
o The Bullet DVR can record a maximum of 129 Lap Times for any given recording session.
o The Bullet DVR unit is compatible with the main signal beacons from AIM, Alfano, XT Racing
and many more who use the same IR signal. For split times support, you can use the XT
Racing split time beacon (up to 4 split beacons added).
The 3 Channel tab is for the configuration of the screen
display, when more than one bullet camera is connected
to the DVR. There are many various combinations possible,
which gives you a lot of flexibility for creating some very
interesting images.