Bullion microADSB User Manual - page 21
21
11.1.4 RAW data Client
The software can receive raw decoder data via network. You can
connect to an active RAW -data-server via the menu point other -
Network - RAW-data client active or by a click on the grey RAW-
data Client button right of the server buttons.
If you want ro receive raw data from the microADSB-WiFi v2
the values from Fig.20 has to be inputed.
Of course you can choose any other RAW -data-server, e.g.
receivers with adsbScope-Software. You can change the IP-
address and the port number of the used RAW -data-server via the
network-setup. Connections to other RAW-data severs have no
time limit.
11.1.5 Server (decoded data)
The software contains a server at port 30003. Via this server the
received and decoded information can be forwarded to multiple
clients.
The output format is (hopefully) compatible to RadarBox and SB S-
Basestation. However, I was not able to test this in detail To start
the server one can click the left of the both gray network-server-
icons (right of the OSM icon). The server is started, a comment is
written in the upper log-window and the icon gets colors. Now
clients can connect the server at port 30003. To deactivate the
server just click on the iconagain.
To test the running server you can start your internet-browser on
the same computer and type in
http://localhost/30003/
.
This server is enabled when sending data to Flightradar24. Description of
how it works can be found at:
http://www.flightradar24.com/software
11.2 Planeplotter
Since version 6.2.3.7x of the PlanePlotter is the possible inclusion of
ADSB-IP receiver directly.
You
can
download
the
latest
version
from:
http://www.coaa.co.uk/planeplotter.htm
To use the IP-receiver with Planeplotter as Mode-S-Receiver one
hast to choose "AVR receiver TCP”
.