C. Crane CC Witness Instruction Manual - page 23
CC Witness
Page 23
Display Screens and Functions
a. “Time and Date” — Use the RIGHT i
>
T
and
LEFT
<
u
I
buttons to move between hours,
minutes, months, days , and years. Use the UP
U
W
and DOWN I
U
buttons to modify the
highlighted item. Use the PLAY Button iII
Y
to
save changes. Use the MENU
P
or BACK
W
to exit without saving.
b. “Sleep Timer” — The Sleep Timer can be set to
play for 15, 30, 45, 60, 75, 90, 100 or 120 min-
utes. When that time expires, the CC Witness will
power off automatically. A
S
icon will ap-
pear at the top of the display to let you know that
the “Sleep Timer” has been enabled. The Sleep
Timer will be disabled if the CC Witness is pow-
ered off and then on again. The Sleep Timer can
also be useful when recording radio shows up to
5. “System Settings”
two hours in length, because it will stop recording
at the set time and then power off.
c. “Auto Off Time” — This setting is used to con-
serve power. There are 4 settings for “Auto Off
Time”: Off, 1, 3, and 5 Minutes. If the CC Witness
is not playing or recording and no buttons are
pressed for the preset amount of time, it will
power off.
d. “Factory Defaults” — This is used to reset the
CC Witness back to the default factory settings.
This setting will not affect the Time, Date, Files,
or Timer schedules.
e. “Format Memory” — Choose to format the inter-
nal or (optional) SD card memory. When memory
is formatted, all files on the selected memory are
permanently erased. It is best to format a new or
previously used SD card before recording files to
it. Use caution when formatting memory, as it
permanently erases your files!
f. “10 or 9 KHZ” —If using the CC Witness to listen
to AM radio in Europe, use this setting to switch
AM Radio to 9kHz AM tuning steps.
Note:
All timer schedules and radio station memory pre-
sets will be erased when switching between 10kHz for
North America and 9kHz tuning steps for Europe. You
may want to write down your presets before using this
function.