C. Crane CC Witness Instruction Manual - page 25
CC Witness
Page 25
Display Screens and Functions
I
U
buttons to move to the next or previous timer
setting. When all settings are set, save the timer
setup by pressing the PLAY Button iII
Y
.
Timer Settings explained:
“Timer”
— Select which timer, by number, to
setup. There are 20 timers available in the
CC Witness.
“Status”
— Choose whether the timer will
“Record” or “Play” when activated. Set to “OFF”
to reset timer back to default settings.
“Memory”
— Choose to record or play using the
“Internal” or the (optional) “SD Card” memory.
“Source”
— If the timer “Status” is set to record,
then select which source (“AM”, “FM”, “MIC”, or
“LINE”) to record from. If the timer “status” is set
to play, then select which source (“AM” radio,
“FM” radio, or a saved “File”) to play from.
“Preset”
— If you have set radio stations to
memory presets, then you can select them in
this setting.
“Freq”
— Manually tune to the desired radio sta-
tion.
“Day(s)”
— Choose to play or record on a spe-
cific “Date” or “Weekday”. If “Weekday” is se-
lected, then by default every day will be selected
to activate the timer. To choose specific days,
highlight “Daily” and press the RIGHT i
>
T
or
LEFT
<
u
I
button to bring up a weekday selec-
tion screen. Mark or unmark weekdays by press-
ing the DOWN I
U
button. When finished,
press the PLAY Button iII
Y
to continue.
“Start”
— Sets the time when the timer will
“Start”.
“End”
— Sets the time when the timer will “End”.
When finished and all settings are set, press the
PLAY Button iII
Y
to save the setup. Confirm by
selecting “YES”. To exit the timer setup without
saving, press the BACK button, then confirm by
selecting “NO”.
2. “Review Timers”
This screen displays the status of all 20 timers.
Timers set to record are marked with an “R” next to
the timer number. Timers set to play are marked
with a “P” next to the timer number. It is possible to
review and modify a timerʼs settings by pressing the