C-MORE EA1-TCL-M Hardware User Manual - Check Project Functionality

Check Project Functionality

During a routine maintenance schedule is a good time to check the functionality of your

application, making sure that various areas on different screens do what they were designed to

do. An outline or specification for the application is a useful tool for testing the various aspects

of your application. As a starting point, you may want to run through all the screens to make

sure they are accessible.

If there are any trouble-shooting procedures programmed into the C-more 6” Micro-Graphic

panel application, now is a good time to also check these aids.

Checks from the C-more Micro-Graphic Programming Software

If you have a PC available with the C-more Micro-Graphic Programming Software,

EA-MG-PGMSW, installed, and the panel is connected to the PC, you can check the status of

the panel from the Panel Information window.

The Panel Information window shown below will indicate the panel type, if a keypad bezel has

been installed, the total memory, memory used, free memory, firmware version, mask ROM

version, and the PLC protocol selected for its serial communication ports. The programming

software can also be used to update the panel’s firmware to the latest version.

7–6

Chapter 7: Maintenance

®

7

EA1-TCL-M Hardware User Manual, 1st Ed., 12/09