C&S Electronics Computemp 5 Owner's Manual - Specifications
2
SPECIFICATIONS
LINE POWER: (103-133V), 60Hz (200-240VAC 50/60 Hz opt.)
ADAPTER OUTPUT: 700MA, 9 VAC
POWER RATINGS: 7.35 VA (7.35W)
BATTERY LIFE: 36 hours backup operation
RANGE: -40
° to + 175°F (-40°C to 80°C)
ACCURACY: + 1% over range
REPEATABILITY: 1.5
°F (1°C)
TEMP. UPDATE RATE: 8 seconds
TIME CONSTANT: 72 seconds (63% of 20
°F/11°C)
AUX PROBE LENGTH: 6 feet (1.8M)
MAIN PROBE LENGTH: 30 feet (9M)
ADAPTOR CORD LENGTH: 6 feet (1.8M)
DISPLAY:4 digit, 0.6” (15MM x 127MM x 64MM)
CASE: White and gray ABS plastic
PROBE HOLDER: Gummed, peeled back clip
POSSIBLE USES FOR EXTRA SENSORS
Green House
Aquariums Swimming Pools
Attic
Food Storage Nursery Room
Solar
Refrigeration AnimalConfinement
Hot Water Pipes Hot Tub Soil
ADD SEVERAL SENSORS TO YOU COMPUTEMP WITH
THE OPTIONAL ROTARY SWITCH MODULE
You may add up to 7 additional sensors to your Computemp which can
monitor a variety of tempeture readings in several locations. With this easy to
install plug-in rotary switch module, you can adapt your Computemp to monitor
tempetures of air, liquid, or mass. Possible applications for additional probes are
listed above. No additional parts are needed, simply disconnect one of your
sensor wires and plug the module in the main or aux. Port of your Computemp.