C&S Electronics Computemp 5 Owner's Manual - Limited One Year Warranty

Summary of Computemp 5

  • Page 1

    Owner’s manual computemp 5 multiple use digital thermometer with 7 day memory congratulations. You are now the owner of one of the most remarkable and fascinating ways available to observe temperature changes. It is our sincere hope that you will find the computemp a fun and fascinating instrument. ...

  • Page 2: Specifications

    2 specifications line power: (103-133v), 60hz (200-240vac 50/60 hz opt.) adapter output: 700ma, 9 vac power ratings: 7.35 va (7.35w) battery life: 36 hours backup operation range: -40 ° to + 175°f (-40°c to 80°c) accuracy: + 1% over range repeatability: 1.5 °f (1°c) temp. Update rate: 8 seconds time...

  • Page 3: Features

    3 features main temperature 30 feet (9m) sensor is primarily intended for measuring ambient outdoor temperature, but other uses are limited only by imagination (other lengths available). Aux temperature measures any temperature within 6 feet (1.8m) of the unit (other lengths available). Time current...

  • Page 4: Operating Instrucitons

    Operating instrucitons if you have not already done so, plug in the computemp, this is accompanied by a chirp. The unit is in the run mode and is alternately displaying main temperature, aux temperature and time. The three small lights changing with the digital read-out indicate what is being displa...

  • Page 5: Silencing Alarms

    5 silencing alarms the time alarm may be reset (shut off) for 24 hours by pressing select. The temp alarm may likewise be reset by pressing select. Temp alarm will not be reactivated until the measured temperature leaves and returns back to the alarm temperature setting. The alarms will not sound wh...

  • Page 6: Unit Calibration

    Unit calibration if the unit is not recording the proper temperature, use the following procedures. If the temperature is off by more than 10 degrees of actual there is some other problem with your unit. (do not attempt to re-calibrate). The temperature adjustment trimmers are positioned behind the ...

  • Page 7: Probe Installation

    Probe installation run the main sensor through a window or any other convenient topening. The ideal location for he sensor is under the eave on the north side of the building. If this is not possible, avoid locations that may be abnormally warm for any reason or where the sun can shine directly on t...

  • Page 8: Limited One Year Warranty

    Limited one year warranty c&s electronics, inc. Warrants this product to be free from defects in workmanship and material under normal use and conditions for a period of one year from the date of original purchase. Should service be required by reason of any defect or malfunction during the warranty...