CAB ps800 Operator's Manual - Attention!
of
8
5
i
Note!
Keep the original packaging for later transports.
!
Attention!
Damage and failure in function by dust, dirtiness and humidity.
Use devices only in a clean and dry environment.
1
3
2
4
5
Figure 1 Mounting the present sensor
Switch off the printer.
Loosen screw (4).
Remove cover (2).
Push the guides of the present sensor (3) under the control panel (1).
Press the present sensor against the printer. Ensure that the SUB-D9
connector of the present sensor will be connected to the peripheral
interface (5) of the printer.
Secure the present sensor with screw (4).
3