CAB ps800 Operator's Manual - Printer Configuration
7
5
Printer Configuration
Peel-off Parameter
Start menu.
Select
Setup >
Peeling-off.
Parameter
Meaning
Default
Peel-off position
Shift the position of the dispensed label
relative to the dispensing edge.
The setting can also be adjusted by the
software.
The settings of configuration and software
are added together.
0.0 mm
Backfeed delay
Delay time between removing the label from
the peel position and the backfeed of the
label.
250 ms
Backfeed position
Offset of the backfeed movement
1.0 mm
Table 2
Parameter of the Setup > Peeling-off menu
Backfeed
Start menu.
Select
Setup >
Printing.
Parameter
Meaning
Default
Backfeed
Method for backfeeding the label medium.
Backfeeding is necessary in the cutting
and peel-off modes since a label is pushed
out passed the front edge of the next label
above the print line when peeling off/cutting.
always: Backfeeding occurs independently of
label contents.
smart: Backfeeding only occurs when the
next label is not yet completely prepared
when peeling off/cutting the current label.
Otherwise, the second label is pushed on
and completed after removal of the first label
without backfeeding.
smart
Table 3
Parameter Backfeed in the Setup > Printing menu