CABASSE Stream 1 Owner's Manual - page 7
6
7
Connecter un câble RJ45 entre le
Stream 1 et votre routeur (ou Box
Internet). La connexion est établie
quand la diode ETH passe au bleu
fixe.
ATTENTION : le routeur doit être
configuré en DHCP.
Use a RJ45 type cable to connect
Stream 1 to the domestic router.
The connection is running when the
blue LED “ETH” stops flashing and
remains on.
ATTENTION: set up the router on
DHCP mode.
CONNEXION FILAIRE (LAN) AU RESEAU ETHERNET
LAN WIRE CONNECTION TO THE ETHERNET NETWORK
Appuyer sur le bouton "RESET" avant d'utiliser un nouveau mode de connexion
wifi (filaire, automatique, semi-auto, manuelle) ou un nouveau routeur.
Press "RESET" before starting a new connection process (wired, auto, easy,
manual) or connecting to a new router.
IL EXISTE 3 SOLUTIONS POUR CONNEC-
TER LE STREAM 1 AU RESEAU WIFI :
1) CONNEXION AUTOMATIQUE avec l'utilisation
des touches WPS du Stream 1 et du routeur (ou box
Internet) s'il en est équipé: presser le bouton WPS du
routeur pendant au moins 2 secondes puis presser dans
les 2 minutes (ces durées sont indicatives, à vérifier dans
le manuel du routeur) qui suivent presser le bouton WPS
du Stream 1. La diode bleue "WIFI CONFIGURATION"
s'allume, la connexion est effective. Continuer à la page 14
avec l'installation de l'application Cabasse.
2) CONNEXION SEMI-AUTOMATIQUE avec
l’application Cabasse sur un smartphone ou une tablette
connecté(e) au réseau Wi-Fi.
a) Installer l’application Cabasse sur la tablette/smart-
phone depuis “Play Store” pour un appareil Android ou
“App store” pour un Mac.
b) Mettre le Stream 1 sous tension (ou appuyer sur le
bouton reset), activer le mode wifi dans l’application
“paramètres” du smart phone ou de la tablette.
c) Sélectionner Stream 1 parmi les appareils disponibles
et demander la connexion.
d) Une fois la connexion établie, ouvrir l’application
Cabasse. Une fois connecté à Stream 1, choisir Stream 1
parmi les appareils Stream du réseau et suivre pas à pas
les instructions d'installation.
Note : vous pouvez lancer l'application Cabasse dès la fin
de la phase b), et continuer le processus de connexion,
l'assistant de configuration apparaissant automatique-
ment pour la première utilisation.
e) Vérifier que la diode bleue Wifi à l’arrière du Stream 1
clignote.
f) Après environ 30 secondes la diode Wifi bleue est fixe :
appuyer sur “Fermer la Page”. Stream 1 est prêt à lire les
fichiers audio partagés de votre réseau ou les radios web
proposées par vTuner.
THERE ARE 3 SOLUTIONS TO CONNECT
STREAM 1 TO THE WIFI NETWORK: :
1) WPS CONNECTION: push the WPS button of the
wireless router for 2 seconds or more and push the WPS
button of the Stream 1 within around 2 minutes (check for
precise delays in the router's manual) . The connection is
completed when the blue LED "WIFI CONFIGURATION" is
on. Now go to page 21 to install the Cabasse application.
2) EASY WI-FI CONNECTION with the Cabasse Stream
app & with a smartphone or tablet wi-fi connected to the
domestic network.
a) Install the Cabasse Stream App on an Android or Mac
tablet or smartphone from “Play Store” or “App Store”.
b) Switch the Stream 1 on or press the reset button if
already on. Activate the Wi-Fi in the “settings” application
mode of the smartphone or tablet.
c) Select Stream 1 among the available items and launch
the connection.
d) Launch the Cabasse Stream app. Once connected to
Stream 1, select Stream 1 in the available wifi networks
list and follow the set-up instructions.
Note: from phase b), you may open the Cabasse applica-
tion and follow the instructions of the online guide, which
is launched automatically when connecting for the first
time.
e) The Wifi blue LED on the back of Stream 1 flashes for
around 30 seconds.
f) The Wifi blue LED stops flashing and remains on: press
on “Close This Window”. Stream 1 is now ready to play
all the shared audio files in your network as well as all the
web radios proposed by vTuner.
CONNEXION DLNA SANS FIL (WLAN) AU RESEAU WIFI
DLNA (WLAN) WIRELESS CONNECTION TO THE WIFI NETWORK