Summary of WPIM-DDS
Page 1
Wpim-dds local management guide.
Page 3: Notice
Wpim-dds local management guide i notice cabletron systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult cabletron systems to determine whether any such changes have been made. The ha...
Page 4
Notice ii wpim-dds local management guide fcc notice this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that ma...
Page 5
Notice wpim-dds local management guide iii cabletron systems, inc. Program license agreement important: before utilizing this product, carefully read this license agreement. This document is an agreement between you, the end user, and cabletron systems, inc. (“cabletron”) that sets forth your rights...
Page 6
Notice iv wpim-dds local management guide united states government restricted rights the enclosed product (a) was developed solely at private expense; (b) contains “restricted computer software” submitted with restricted rights in accordance with section 52227-19 (a) through (d) of the commercial co...
Page 7: Contents
Wpim-dds local management guide v contents chapter 1 introduction 1.1 using this manual....................................................................... 1-1 1.2 document conventions ............................................................... 1-2 1.3 wpim-dds features..........................
Page 8
Contents vi wpim-dds local management guide.
Page 9: Chapter 1
Wpim-dds local management guide 1-1 chapter 1 introduction welcome to the cabletron systems wpim-dds local management guide . This manual explains how to use local management to control and manage the cabletron systems wpim-dds. This manual also provides a summary of the most widely used wan terms a...
Page 10: Introduction
Chapter 1: introduction 1-2 wpim-dds local management guide the following list briefly explains each chapter of the wpim-dds manual: chapter 1, introduction , outlines the contents of this manual, describes wpim-dds features, lists specifications, and concludes with a list of related manuals. Chapte...
Page 11: 1.3
Wpim-dds features wpim-dds local management guide 1-3 1.3 wpim-dds features the wpim-dds extends the functionality of the wide area network module to allow remote connectivity using digital data service (dds). The wpim-dds provides a dds interface that includes a built-in channel service unit/digita...
Page 12: 1.5
Chapter 1: introduction 1-4 wpim-dds local management guide 1.5 wpim-dds specifications this section describes the environmental specifications and safety and approval requirements for the wpim-dds. Cabletron systems reserves the right to change these specifications at any time without notice. Envir...
Page 13: 1.6
Getting help wpim-dds local management guide 1-5 1.6 getting help if you need additional support related to this device, or if you have any questions, comments, or suggestions concerning this manual, contact cabletron systems technical support: before calling cabletron systems technical support, hav...
Page 14: 1.7
Chapter 1: introduction 1-6 wpim-dds local management guide 1.7 related manuals refer to the manual included with the host wide area network module (e.G., the brim-w6 user’s guide ) to supplement the procedures and other technical data provided in this manual. Refer to the mim, standalone hub or mod...
Page 15: Chapter 2
Wpim-dds local management guide 2-1 chapter 2 local management this chapter explains how to configure the wpim-dds through local management. The wan physical configuration screen and the wan interface configuration screen appear as local management menu selections after you install the wpim-dds into...
Page 16: 2.1.1
Chapter 2: local management 2-2 wpim-dds local management guide figure 2-1 wan physical configuration screen 2.1.1 wan physical configuration screen fields the following sections describe wan physical configuration screen fields and instructions for setting them. The wan physical configuration scree...
Page 17: Secondary
The wan physical configuration screen wpim-dds local management guide 2-3 the wan physical configuration screen displays the following information for each wpim. Wpim 1-4 displays configuration information for as many as four wpims. Type displays the wpim type. Brim # displays the brim slot in which...
Page 18: Is Dds-Pri.
Chapter 2: local management 2-4 wpim-dds local management guide dds line mode displays the dds line mode. The selections toggle between dds-pri (primary) and dds-cc (clear channel). This field should be set according to the instruction of your service provider. The default setting for this field is ...
Page 19: 2.2
The wan interface configuration screen wpim-dds local management guide 2-5 2.2 the wan interface configuration screen this section describes the features of the wan interface configuration screen. Access the screen by using the arrow keys to highlight the wan int config command field at the bottom o...
Page 20: The Default Setting Is No.
Chapter 2: local management 2-6 wpim-dds local management guide data compression displays the status of data compression. This field displays yes or no. The default setting is no. Max xmit unit user configured field that displays the maximum packet size that can be transmitted on the selected interf...
Page 21: 2.3
Wpim-dds configuration wpim-dds local management guide 2-7 pt# displays the application ports (bridge ports) available from the host platform to the wan. If the active protocol is ppp, local management assigns only one application port per interface number (if#). If the active protocol is frame rela...
Page 22: 2.3.1
Chapter 2: local management 2-8 wpim-dds local management guide the line configuration information shown in table 2-1, must be supplied by the service provider. 2.3.1 wpim-dds physical configuration begin the wpim-dds configuration by accessing the wan physical configuration screen (figure 2-1) thro...
Page 23: 2.3.2
Wpim-dds configuration wpim-dds local management guide 2-9 2.3.2 wpim-dds interface configuration this screen is accessed through the wan physical configuration screen. Refer to figure 2-2 and proceed with the following steps to configure the wan interface through local management. 1. Use the arrow ...
Page 24
Chapter 2: local management 2-10 wpim-dds local management guide.
Page 25: Appendix A
Wpim-dds local management guide a-1 appendix a wan terms and acronyms this appendix provides definitions for wan terms and acronyms. Ami alternate mark inversion. Line coding used with both e-1 and t-1. A digital 1 is encoded as a “mark” (pulse) and a 0 is encoded as a “space.” the marks alternate p...
Page 26
Appendix a: wan terms and acronyms a-2 wpim-dds local management guide csu channel service unit. A device that terminates the local loop/digital channel on a customer’s (dsu) premises. The csu connects to a dsx-1 interface on the cpe. Dce data communications equipment. A device such as a modem that ...
Page 27
Wan terms and acronyms wpim-dds local management guide a-3 hdlc high-level data link control. A layer 2 (link layer) full-duplex protocol derived from sdlc. Inv-hdlc a form of zero suppression in which all zeros in the hdlc packet are changed to ones and all ones are changed to zeros. Isdn integrate...
Page 28
Appendix a: wan terms and acronyms a-4 wpim-dds local management guide pvc permanent virtual circuit. A virtual circuit that provides the equivalent of a dedicated private line service. Q.933-a q.933 annex a. An itu link management protocol specification used in frame relay. Sdlc synchronous data li...