Cactus V5 User Manual - page 14
Other manuals for V5:
User Manual, User Manual
of
24
14
9. Multi-Channel Triggering
Multi-channel triggering is a new feature
of Cactus V5. With this new function, you
can now trigger up to four (4) sets of
flashesandstrobesseparatelyorallat
once.
On the side of each V5 transceiver is a
rotary Channel Dial with the numbers 1 to
16 printed, 1 to 5 in blue color, and 6 to
16 in white. The Channel Dial is used to
change the transceiver channel – either in
TX or RX mode – from one to another.
To make use of the multi-
channel triggering feature,
ensure that the TX
transceiver is set to
Channel 1, while RX
transceiversforflashesand
strobes to be triggered by
this TX transceiver is set
to a ”channel in blue” (i.e.
Channels 1 to 5).