Cactus V5 User Manual - page 18
18
3. Flash Not Triggered / Shutter Not
Released
LED BLINkS? POSSIBLE CAUSE
SOLUTION
TX: No
RX: No
1. Poor battery
contact or
battery out of
power on TX
- Replace batteries on TX
and retry
2. Shutter speed
is faster than
the camera’s
x-sync
limitation
- Adjust the camera’s
shutter speed to the
maximum supported x-
sync speed
TX: Yes
(GREEN)
RX: No
1. Poor battery
contact or
battery out of
power on RX
- Replace batteries on RX
and retry
2. Channel mis-
match
- Ensure both transceivers
are set to the same
channel
3. Background
radio
interference
- Set both transceivers to
another channel
- Change setup location as
interference may come
from other equipment in
the surrounding area
4. Beyond 100m
effective
range
- Make sure TX and RX
transceivers are placed
within 100m (328 ft) of
each other
Note:
The effective
range of 100m (328 ft)
may not be achieved in
the presence of radio
interference