Cactus V5 User Manual - page 17
17
1.FlashMisfire(UnexpectedFlashFiring)
LED BLINkS? POSSIBLE CAUSE
SOLUTION
TX: No
RX: No
Poor hot shoe
connection
- Adjust tightness of hot
shoe contact
- Remove hot shoe metal
plate
- Clean hot shoe contact
ofV5andflashwithclean
cloth
TX: No
RX: Yes
(GREEN)
1. Background
radio
interference
- Set both transceivers to
another channel
- Change setup location as
interference may come
from other equipment in
the surrounding area
2. TX and RX
transceivers
are placed
too close to
each other
- Place the TX and RX
transceivers at least
one meter apart and
retry
2. Slow Synchronization (Delayed Flash)
LED BLINkS? POSSIBLE CAUSE
SOLUTION
TX: Yes
(GREEN)
RX: Yes
(GREEN)
1. Shutter
speed is
faster than
the camera’s
x-sync
limitation
- Adjust the camera’s
shutter speed to the
maximum supported x-sync
speed
2. Radio
interference
with wireless
shutter
release
-Ensureflashtrigger
transceivers are set to
a different channel from
that used by wireless
shutter release
transceivers
TX or RX:
Yes (RED
every 3
secs)
Insufficient
battery power
- Replace batteries and
retry