CalAmp ITC 220 User manual - page 31
ITC 220 Base Station, Locomotive & Wayside Radio Transceiver Field Service Guide PN 0046300120 Rev. A
| Page 25
8. In XtermW, set the connection properties for the MAINT port connection as shown in the following figure.
Figure 15 XtermW Configure Port window with settings for MAINT port
Note TCP/IP Settings for Host on the MAINT port is configured for IP address 192.168.255.201.
5.4.2 TO CONFIGURE THE COMPUTER ETHERNET 2 INTERFACE FOR COMMUNICATION WITH
THE TRANSCEIVER LAN PORT
1. On the computer, click Start, Control Panel, Network Connections, and then Local Area Connection.
There will be one Local Area Connection icon for each Ethernet port on the computer. Click the Local Area
Connection icon that corresponds to the second Ethernet port.
2. The Local Area Network Connection Status window opens. Click Properties and the Local Area Connection
Properties window for the second Ethernet connection opens.