CalAmp ITC 220 User manual - page 34
ITC 220 Base Station, Locomotive & Wayside Radio Transceiver Field Service Guide PN 0046300120 Rev. A
| Page 28
8. In XtermW, set the connection properties for the LAN port connection as shown in the following figure.
Figure 18 XtermW Configure Port window with settings for LAN port
Note TCP/IP Settings for Host on the LAN port is configured for IP address 10.255.255.201.
5.4.3 CREATING AN XTERMW CONNECTION PROFILE
A connection profile is a group of configuration settings created in XtermW and saved to use again for convenience
when connecting to an Ethernet port using the same settings.
To create an XtermW connection profile
1. Open XtermW if it is not already open.
2. From the File menu, select New Connection and the Connection Description window opens.
Figure 19 Connection Description window
3. Enter a name for the connection and then click OK.