Caliber RMD602 Operating instructions manual - Usb/sd/mmc/mp3 Playback
13
USB/SD/MMC/MP3 Playback
MP3 Playing Order
When selected for play, files and folders
(Folder Search, File Search or Folder Select)
are accessed in the order in which they were
written to the media. As a result, the order in
which they are expected to be played may
not match the order in which they are actually
played. You may be able to set the order in
which MP3/WMA files are to be played by
assigning file names beginning with play
sequence numbers such as "01" to "99". For
example, a medium with the following folder/
file hierarchy is subject to Folder Search, File
Search or Folder Select as shown below.
(
)
0
1
2
♪
①
♪
②
5
♪
⑧
♪
⑦
6
7
♪
⑨
♪
③
3
4
♪
④
♪
⑤
♪
⑥
Layer1 Layer 2 Layer 3 Layer 4 Layer5
○
Root Folder
Folder
♪
File
The player will only recognize three folder
levels and does not display folders containing
only other folders. In the example above, the
unit will display folders 3, 4, 6, and 8, but not 2
and 7 since they do not contain since they do
not contain any tracks directly. Folder 5 is not
recognized at all since it is at the fourth level.
Electronic Shock Protection
• >45 seconds for MP3 recorded at 44.1kHz,
128kbps
• >90 seconds for WMA recorded at 44.1kHz,
128kbps
Stop Playback Temporarily
- During playback, press
to pause
playback.
- The sound will be muted.
- Display "PAUSE" in the TV screen.
Press again to continue playback.
To resume normal play, repeat the operation.
Stop Playback Entirely
During MP3 playback:
1. Press key once stopping the playback
and the relevant location is saved, press
to resume the playback from the saved
location.
2. Press twice to cease the playback. Press
to start the playback from the very
beginning the Title page.
Select Desired Track
- Press or to skip to the next track.
- Use 1-9 and 0, 10+ buttons on the remote
control to select desired track number.
Fast Forward/Backward During
Playback
Press or for more than 2 seconds once
or more to select X2, X4, X8, X20, to fast
backward or forward track during playback.
- During the fast forward or backward
operation, press briefly to playback
again.
- During the fast forward or backward
operation, the volume will be muted.
Repeat
During playback, press
REPEAT
once or
more.
- RPT icon will appear on the display.
- For File: Display appears RPT ONE
RPT
DIR
RPT ALL
RPT OFF
Note:
If you do not select RPT on, when the entire
playback has finished, the system will stop. If
no other control, after 5 minutes the unit will
turn into standby mode.