Mp3/usb/sd/mmc player, with fm/mw tuner operating instructions thank you for purchasing the rmd602.
1 safety precautions to ensure safe driving, please adjust the volume to a safe & comfort level in case of emergency situations. Never expose this unit, amplifier, and speakers to moisture or water for preventing electric sparks or fires. Please don't change the fuse on the power cord without profes...
2 contents safety precautions ......................................... 1 contents ......................................................... 2 features ......................................................... 3 panel controls ................................................ 4 remote controls .........
3 wma and mp3 compatibility it is possible to playback wma and mp3 files. About wma the unit can playback wma data. Windows media and the windows logo are trade marks or registered trademarks of microsoft corporation in the united states and/or other countries. This unit may not operate correctly de...
4 panel controls power on/off: press to turn on/off the unit. 1. - short press to select playing mode: • radio • usb (when usb inserted) • sd (when sd/mmc inserted) • av (front audio & video input. External peripheral devices can be connected with the unit.) - long press to ret urn to main source me...
5 press to turn on/off the unit. Replacing the lithium battery when the range of operation of the card remote control becomes short or no function, replace the lithium battery with a new one. Make sure the battery polarity replacement is correct. 1. Pull out the battery holder while pressing the sto...
6 basic operations turn on/off the power 1. Press to turn on the unit. The unit goes back to the last status after power on. 2. Press more than two secnonds to power off. Mute press the button to cut the sound. Note: • doing the operation above again or adjusting volume will release muting. • mute i...
7 rotary knob menu 1. Rotate the knob to adjust volume level. 2. Short press to access the audio & video setting menu. Each press the knob to change the audio mode: eq/bass/treble/balance/fader, and rotate the knob to adjust level. Each press the knob to change the video mode: bright/contrast/satura...
8 video setting tv system: ntsc/pal/auto select the tv system in the setting menu. Tv type: 4:3ps/4:3lb/16:9 select tv type to watch wide screen movies. 4:3 pan scan: for 4:3 tv, left and right edges will be cut. 4:3 letter box: for 4:3 tv, black bars will appear on top and bottom. 16:9: for 16:9 wi...
9 radio mode accessing radio mode press the src button on the front panel or remote control to switch to the radio source. 1. Source indicator 2. Current preset channels 3. Time/clock 4. Am/fm band 5. Radio station frequency 6. Eq indicator selecting a band press band once or more to select fm1- fm2...
10 usb/sd/mmc/mp3 playback 1. Load sd/mmc card insert the sd/mmc card into the slot, with the front side at left. The unit will play the music automatically and the lcd will show card. 2. Take out sd/mmc card press src button and switch to non card mode, slightly press sd/mmc card, take out the card...
11 usb/sd/mmc/mp3 playback accessing usb/sd card mode to play files from an sd or usb that is already inserted, choose the card or usb source. The playback screen is indicated below: file type supported audio file: mp3(*.Mp3), wma(*.Wma) video file: mp4 (*.Avi, divx3.11/4.0/5.0/6.0) mpeg 1 (*.Dat) p...
12 usb/sd/mmc/mp3 playback for picture files 1. Press esc to return to playlist menu. 2. Use / to select picture folders. 3. Press ok , on the front panel or enter on the remote control to display all available picture file folders. 4. Use / to enter file list and use / to select desired file, press...
13 usb/sd/mmc/mp3 playback mp3 playing order when selected for play, files and folders (folder search, file search or folder select) are accessed in the order in which they were written to the media. As a result, the order in which they are expected to be played may not match the order in which they...
14 usb/sd/mmc/mp3 playback repeat a b select desired passage to repeat playback. - press a b once to select starting point. Display shows repeat a. - press a b again to select ending point. Display shows repeat a b, and selected passage start to replay. - press a b once again to exit. Display shows ...
15 device connections notes of connection • to avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected before installation. • to prevent short circuit in the wiring and damaging to this unit, secure all wirings with cable clamp or adhesive tape. Route the...
16 device connections wiring diagram rear line-out(gray ) iso connector amplifier connector l(white) r(red ) (pink) radio antenna reverse (active high level input ) fuse 15a v ideo-out (y ellow) (y ellow) camera-in (green/ white) parking sw (active low level input).
17 installation guide preparation 1. Disconnect battery before you begin, always disconnect the battery negative terminal. Note: if the unit is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the comp...
18 all connections are secure and insulated with wire nuts or electrical tape. After completing the wiring connections, turn the unit on to confirm operation (vehicle ignition must be on). If the unit does not operate, re-check all wiring until the problem is corrected. 5. Make sure the radio is rig...
19 reset the reset button is located behind the front panel and can only be accessed with the front panel opened. Resetting the unit will erase the time and preset memories. It should only be activated upon initial installation after all wiring is complete, or if there is a malfunction of any of the...
20 troubleshooting if you suspect something is wrong, immediately switch power off. Immediately stop using it and call the store where you purchased it. Never try to repair the unit yourself because it is dangerous to do so. Problem possible cause solution general the unit will not switch on. Car ig...
21 specifications general power supply: 12vdc (11v-16v), test voltage 14.4v, negative ground maximum power output: 75w x 4 channels continuous power output: 20w x 4 channels (4 10% t.H.D.) suitable speaker impedance: 4-8ohm pre-amp output voltage: 2.0v (play mode: 1khz, 0db, 10k load) fuse: 15a dime...