Caliber RMD602 Operating instructions manual - Remote Controls
5
Press to turn on/off the unit.
Replacing the lithium battery
When the range of operation of the card
remote control becomes short or no function,
replace the lithium battery with a new one.
Make sure the battery polarity replacement is
correct.
1. Pull out the battery holder while pressing
the stopper.
2. Insert the button-type lithium battery with
the (+) mark facing upward. Insert the battery
holder into the remote control.
1
2
(CR 2025)
Remote Control Operating Range
The remote control can operate within a
distance of 3~5m.
Warning
• Store the battery where children cannot
reach. If a child accidentally swallows the
battery, consult a doctor immediately.
• Do not recharge, short, disassemble or heat
the battery or dispose it in a fire.
• Do not leave the battery with other metallic
materials. Otherwise, the battery may start
to give off heat, crack or catch fire.
• When throwing away or saving the battery,
wrap it in tape and insulate.
1. Power on/off
2. Setup
3. Menu cursor
4. Enter
5. Program
6. Digit area
7. Select Audio/Video Setting, then rotate the
knob to adjust level.
8. Volume
9. - Radio tune
- Track skip/seek
10. Source switch
11. Zoom
12. Repeat
13. Repeat A-B
14. Stop/Return
15. Play/Pause
16. Goto search
17. - OSD: On screen display
- AMS: Search and store stations
automatically
18. - DISP: Display time/clock (Video mode)
- ESC: Return to previous menu
19. - Video system PAL/NTSC/AUTO
- Radio band (in Radio mode)
20. Mute