CALOR DG3000WHB-7B Installation And Operation Instructions Manual - page 12
12
3) Press WAKE key. Once pressed, WAKE flashes to show it is selected
4) Press Up and Down keys to modify time and heat temperature from this screen.
5) Press LEAVE key and repeat step 4.
6) Press RETURN key and repeat 4
7) Press SLEEP key and repeat 5.
8) Press Day key and repeat 2)-7) to program another day of the week.
9) When complete, press DOWN key to return to run schedule. Hold RESET key for 3 seconds,
display will flash 3 times and back to factory default setting program.
Programming Tip: COPY Button
You may copy and daily program to another day or group of days by pressing the COPY button.
In 7 day programming mode when the COPY button is pressed, the other 6 days of the week will
flash. To copy the current program into the remaining six days, simply press the COPY button
again. To copy the current program to another day of the week, press DAY button to select the
day and press COPY to paste the program. In 5/1/1 day programming mode the copy function is
similar. The weekday (Mon-Fri) Program can be copied to Sat and Sun (both flashing) or use DAY
to choose Sat or Sun and press the COPY button to paste the program