CALOR DG3000WHB-7B Installation And Operation Instructions Manual - page 7
7
Select FA to start heating immediately when the set point is 1
℃
above the room temperature.
Select SL to start heating only when the set point is 3
℃
above the room temperature.
6)
Select pump protection mode
For hot water installations, it is recommended to activate the pump at least 15 second every
24 hours in order to avoid any seizing. Select yES will activate pump protection mode. Select nO
will cancel the function.
7)
Selection of time scale
12 indicates 12 hour clock and 24 indicates 24 hour clock
8) Select display backlight mode
The display backlight improves display contrast in low lighting conditions. Select 1 the light
will be on when any button of the thermostat is touched. Select 2 the display will keep the light off.
Select 3 the display will keep the light on continuously. Factory default is 1.
9)
Programming day in one week option
There are 2 options for how to program the day in one week.
7: You can program in 7 individual days
3: You can program in 5 weekday and 1Saturday and 1Sunday.
10) Select
keypad
lockout on or off
UnL-unlock. All keys are available. Screen is unlocked
PAL-partially locked. All key functions are locked except SYSTEM key; temperature Up and
Down keys and the CANCEL key. Enter Configuration setup to unlock the screen
FUL-fully locked. Screen is fully locked except SYSTEM key. Enter Configuration setup to
unlock the screen
Operation Your Thermostat
Setting System Key
Heat-thermostat controls your heating system.
Off-Heating system is off
Setting Temperature Override
Your thermostat has three temperature override options: Hold Temperature Until, Permanent Hold and
Vacation Hold
Hold Temperature Until (Temporary Hold)
Holds temperature temporarily until next scheduled period time or until the time the user sets.
1) Press Up or Down arrow next to the temperature you want to adjust. “Hold Until” time
appears on the screen. The Hold Temperature until time defaults to the start time of the next
scheduled period.
2) Press Up or Down arrow next to the Time key to set desired time for the thermostat to