Cambium Networks PTP 820 Installation Manual - Adaptor With Circular Tube
PTP 820 REMEC Adaptor Installation Guide
10
Exhibition B – Installation of REMEC Interface
Adaptor with Circular Tube
This guide explains the process for installing an PTP 820C, PTP820S, or RFU-C unit to an
antenna using following adaptors:
N110082L126A PTP820 REMEC interface Antenna Adaptor Kit, 11 GHz, Dual Pol
N180082L063A PTP820 REMEC interface Antenna Adaptor Kit, 18 GHz, Dual Pol
N230082L070A PTP820 REMEC interface Antenna Adaptor Kit, 23 GHz, Dual Pol
Installation options are:
•
OMT (2 x PTP 820S or 2 x RFU-C)
•
OMT (1 x PTP 820C)
Required tools
•
Metric offset hexagon key wrench #6
•
Metric offset hexagon key wrench #3
•
Screwdriver Phillips #2
Procedure
1. Mount the O-Ring supplied in the PTP 820SS/ RFU-C REMEC ADAPTOR KIT on the
REMEC Tube. Make sure the mounting direction is correct, as shown in the section view