Cambium Networks PTP 820 Installation Manual - page 2
Other manuals for PTP 820:
Manual
Manual is about: Bringing up your first link
of
11
PTP 820 REMEC Adaptor Installation Guide
2
Exhibition A – Installation of REMEC Interface
antenna adaptor kit – Single Pol
This guide explains the process for installing an PTP 820C, PTP820S, or RFU-C unit to an
antenna using following adaptors:
N060082L217A PTP820 REMEC interface Antenna Adaptor Kit, 6 GHz, Single Pol
N110082L125A PTP820 REMEC interface Antenna Adaptor Kit, 11 GHz, Single Pol
N180082L062A PTP820 REMEC interface Antenna Adaptor Kit, 18 GHz, Single Pol
Installation options are:
•
Direct Mount (1 x PTP 820S or 1 x RFU-C)
•
Coupler (2 x PTP 820S or 2 x RFU-C)
•
Splitter (1 x PTP 820C)
Required tools
•
Metric offset hexagon key wrench #6
•
Metric offset hexagon key wrench #3
•
Screwdriver Phillips #2