CAMBOARD MMX 32 VGA MTP User Manual - page 17
MMX 32 VGA MTP • Remote Control
Remote Control, cont’d
MMX 32 VGA MTP • Remote Control
Figure 3-5 — Universal Switcher Control
Program window
Resetting the switcher
The Unit Reset window allows you to clear all user settings and
reset the switcher to its factory settings. To reset the switcher:
1.
Click Unit Reset on the Configure menu. The Unit Reset
window appears (figure 3-6).
Figure 3-6 —
Unit Reset window
2.
Click the Total FACTORY RESET! button.
3.
Click OK on the warning window.
4.
Click OK on the final warning window
5.
Click Close.
At any point before clicking on the final warning “OK”,
the reset process can be stopped end exited by clicking
cancel or the “X” in the top right corner.
3-11
3-10
Windows-based control program
The Universal Switcher Control Program is compatible with
Windows 3.1/3.11 and later. It provides remote control of the
input selection for each output (including video/audio
breakaway), audio gain and attenuation adjustments, and front
panel lock out.
Updates to this program can be downloaded from the Extron
Web site (http://www.extron.com).
Installing the software
The program is contained on a single CD and should be
installed to and run from the hard drive. Insert the CD into the
CD drive, and the software will automatically begin installation
to the hard drive. Follow the on-screen instructions.
By default, the Windows installation creates a C:\Program
Files\Extron\UNIVSW folder and places two icons (Universal
Switcher Control Program and Universal Switcher Help) into
the folder. An icon for the Control Program may also be placed
on the PC Desktop for quick access.
Using the software
To run the software:
1
.
Double-click the Universal Switcher
Control Program icon in the Extron program
group, or on the PC Desktop.
2
.
Click the com port that is connected to the switcher’s
remote connector.
3
.
Click OK. The Extron Universal Switcher Control Program
window displays the selected inputs for each output
(figure 3-5).
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de