CAMBOARD MMX 32 VGA MTP User Manual - page 21
MMX 32 VGA MTP • Specifications, Parts, and Accessories
MMX 32 VGA MTP • Specifications, Parts, and Accessories
Specifications, Parts, and Accessories
A-3
Nominal level .............................. 1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of
component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... 0.3 V to 2.0 Vp-p
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
DC offset ....................................... <±20 mV with input at 0 offset
Sync
Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................. RGBHV, RGBS, RGsB
Input level ..................................... 2.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level .................................. AGC to TTL: 4 V to 5 Vp-p, unterminated
Input impedance .......................... 510 ohms
Output impedance ...................... 75 ohms
Max input voltage ....................... 5 Vp-p
Max. propagation delay .............. 30 ns
Max. rise/fall time ....................... 4.2 ns
Polarity .......................................... Positive or negative (selectable at receiver)
Audio
Routing .......................................... 3 x 2 stereo matrix
Gain ...............................................
Output 1 (local output) ... Unbalanced output: 0 dB
Output 2a (CAT 5 receiver)
............................................ Unbalanced output: 0 dB;
balanced output: +6 dB
Output 2b .......................... Unbalanced output: 0 dB;
balanced output: +6 dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................ 0.15% @ 1 kHz, 0.3% @ 20 kHz nominal
level
S/N ............................................... >90 dB at rated maximum output
Crosstalk ....................................... <-76 dB @ 1 kHz, fully loaded
Stereo channel separation .......... >-76 dB @ 1 kHz
CMRR ............................................ >-75 dB @ 20 Hz to 20 kHz
A-2
Specifications
Video
Routing .......................................... 3 x 2 matrix
Gain ............................................... Unity
Bandwidth .................................... 300 MHz (-3 dB), fully loaded
0 – 10 MHz ..... no more than +0.1 dB to
-0.1 dB
0 – 130 MHz ... no more than +2 dB to
-0.1 dB
Crosstalk ....................................... -55 dB @ 10 MHz, -45 dB @ 30 MHz,
-37 dB @ 100 MHz
Switching speed ........................... 200 ns (max.)
Video input
Number/signal type ................... 3 RGBHV, RGBS, RGsB, RsGsBs,
component video, S-video, or composite
video
Connectors .................................... (3) 15-pin HD female
Nominal level ............................... 1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of
component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... Analog: -0.5 V to 2.0 Vp-p with no offset
at unity gain
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 145 kHz
Vertical frequency ....................... 30 Hz to 170 Hz
Return loss .................................... <-42 dB @ 5 MHz
DC offset (max. allowable) ......... 4.0 V
Video output
Number/signal type ................... 2 analog RGBHV, RGBS, RGsB, RsGsBs,
component video, S-video, or composite
video
Connectors .................................... (1) 15-pin HD female
1 RJ-45 female (for proprietary analog
signals to be received by MTP R 15HD A,
MTP RL 15HD A, MTP RL 15HD A SEQ)
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de