Campersat Satellite system Supplementary installation handbook - page 8
Campersat AutoSeek Autoskew
8
H4441 Build 4441 August 2008
NOTE: +12V/24V is RED and COMMON GROUND is BROWN
b) To interconnect the Oyster you should use cables with a diameter of 2.5mm². Use
4mm² if the length of your cables extend beyond 5m.
c) Always directly connect the system to the vehicle’s battery. If you find existing
power lines in the vehicles, note that they are most often NOT sufficient to supply
the AutoSkew.Never ever connect the AutoSkew to lines of any other high power
system, such as an air conditioner, a microwave oven or anything that is suspected of
producing interference such as an electric ignition to any kind of a gas heater. Such
systems will severely interfere with the AutoSkew and will disturb regular operation.
d) If you find a central fuse and switch unit in the vehicle, you may connect the
AutoSkew to it, if this unit is directly connected to the batteries with large diameter
cables (25mm² and up).In case of any trouble try to bypass such a unit to see if it
fixes the trouble. Any fuse along the power line should be between 10A and 20A.