Canford MINX MIXER Operating Instructions Manual - page 3
02-406 (Issue 1) 01/03
MINX MIXER - OPERATING INSTRUCTIONS
- 3 -
INTRODUCTION
Thank you for choosing the Minx mini mixer.
A lot of care and attention has gone into the design and build of this product and we hope that it
will serve you well. Like any technology product the only way to get the best from it is to
thoroughly read and understand the manual.
Should you find any aspect of this product and its related documentation ambiguous or confusing
please let us know.
Additionally, should you perceive ways in which the Minx could be improved we would welcome
your comments.
APPLICATION
The Minx was designed to be for 2 man operation nominally presenter (DJ) and engineer. The
presenter need not necessarily be next to the engineer as talkback exists from engineer to
presenter also the engineer/presenter can talk back two-way with base on the CUE line.
Typical uses are:
Sports Events
Mics for presenter, actuality and
guest.
Town Hall
Expanding existing mic positions
at debates etc.
Live OBs
Less than 6lb in weight and
battery powered the Minx can
feed radio links (remote pickup)
or radio mics at mic level.
These are just typical uses. The Minx is so compact and versatile, yet with such good quality
specs. it can be used as a sub-mixer at concerts, feed ENG cameras/VCRs or for local work.
CANFORD AUDIO PLC
CROWTHER ROAD WASHINGTON
TYNE & WEAR NE38 OBW, UK
admin (0191)418 1000
sales (0191)418 1122
fax (0191)418 1001
technical data