Cannondale en 14764 Supplemental Owner's Manual - page 14
12
13
E-Series Owner’s Manual Supplement - 129184.PDF
Esp
añol
ITal
Ia
No
NEDER
la
ND
s
FR
aNÇ
aI
s
DEUT
sCH
ENG
lI
sH
Esp
añol
ITal
Ia
No
NEDER
la
ND
s
FR
aNÇ
aI
s
DEUT
sCH
ENG
lI
sH
switching the drive hmI on/off
To switch on the drive HMI, briefly press the on/off button 5.
When the internal battery pack is sufficiently charged, the drive
HMI can also be switched on when not inserted in the holder.
To switch off the drive HMI, press the on/off button 5. When the
drive HMI is not inserted in the holder and no button is pressed,
it automatically switches off after 1 min to save energy.
Battery Charge-control Indicator
The battery-pack charge-control indicator (f) indicates the
charge condition of the eBike’s battery pack, and not the
charge condition of the drive HMI’s internal battery pack. The
charge condition of the eBike’s battery pack can also be read
from the battery pack’s lEDs.
on indicator f, each bar of the battery pack symbol is equi-
valent to a capacity of approx. 20 %:
displayed/ Battery level
100 - 80%
39-20%
79 - 60%
20 - 5%
59 - 40%
5 - 0%
100 % to 80 % capacity
20 % to 5 % capacity; the battery pack should be recharged.
less than 5 % capacity; drive assistance is no longer possible.
The lEDs of the charge-control indicator on the battery pack
go out.
When the eBike lighting is powered via the battery pack (country-
specific), the capacity upon first indication of the empty battery
pack symbol will be sufficient for approx. 2 hours of lighting.
When the symbol begins to flash, the lighting will continue to
operate only for a short period. When the drive HMI is removed
from holder 4, the last indicated battery pack charge condition
is stored.
setting the assistance level
The level of assistance of the eBike drive when pedaling can
be adjusted via the drive HMI. The assistance level can be
changed anytime, even during riding.
Note: For individual versions, it is possible that the the assi-
stance level is preset and cannot be changed. It is also possible
that less assistance levels are available for selection than
listed here.
The following assistance levels (max.) are available:
■ “off”: The drive is switched off, the eBike can be
operated as a normal bicycle through pedaling.
■ “eCo”: Effective assistance at maximum efficiency for
maximum cruising range
■ “toUr”: Uniform assistance, for touring with long
cruising range
■ “sPort”: powerful assistance for sportive riding off
road as well as for urban traffic
■ “tUrBo”: Maximum assistance, supporting highest
cadence for sportive riding
To increase the assistance level, press the “+” button 13
on the operating unit until the desired assistance level is
displayed in indicator b; to decrease the assistance level,
press the “ –” button 12.
The requested motor output is displayed in indicator a. The
maximum motor output depends on the selected assistance
level.
Motor output*
assistance
level
derailleur
Gear hub
“eCo”
30%
30%
“toUr”
100%
90%
“sPort”
170%
150%
“tUrBo”
250%
200%
* The motor output can vary for individual versions.
When the drive HMI is removed from holder 4, the last indi-
cated assistance level is stored; the motor-output indicator
a remains empty.