Cannondale Synapse Carbon Owner's Manual - Part I
34
PaRt i
They only engage or disengage with a very specific
motion which must be practiced until it becomes
instinctive. Clipless pedals require shoes and cleats
which are compatible with the make and model
pedal being used.
Many clipless pedals are designed to allow the rider
to adjust the amount of force needed to engage or
disengage the foot. Follow the pedal manufacturer’s
instructions, or ask your dealer to show you how to
make this adjustment. Use the easiest setting until
engaging and disengaging becomes a reflex action,
but always make sure that there is sufficient tension
to prevent unintended release of your foot from the
pedal.
WaRninG
CliPless Pedals aRe intended foR Use
With shoes sPeCifiCally made to fit
them and aRe desiGned to fiRmly keeP
the foot enGaGed With the Pedal.
do not Use shoes WhiCh do not enGaGe
the Pedals CoRReCtly.
Practice is required to learn to engage and disengage
the foot safely. Until engaging and disengaging the
foot becomes a reflex action, the technique requires
concentration which can distract your attention and
cause you to lose control and fall. Practice engaging
and disengaging clipless pedals in a place where
there are no obstacles, hazards or traffic; and be sure
to follow the pedal manufacturer’s setup and service
instructions. If you do not have the manufacturer’s
instructions, see your dealer or contact the
manufacturer.
4.f - BiCyCle sUsPension
Many bicycles are equipped with suspension systems.
There are many different types of suspension systems
— too many to deal with individually in this Manual. If
your bicycle has a suspension system of any kind, be
sure to read and follow the suspension manufacturer’s
setup and service instructions. If you do not have
the manufacturer’s instructions, see your dealer or
contact the manufacturer.
WaRninG
failURe to maintain, CheCk and
PRoPeRly adJUst the sUsPension system
may ResUlt in sUsPension malfUnCtion,
WhiCh may CaUse yoU to lose ContRol
and fall.
If your bike has suspension, the increased speed you
may develop also increases your risk of injury. For
example, when braking, the front of a suspended bike
dips. You could lose control and fall if you do not have
experience with this system. Learn to handle your
suspension system safely. See also SECTION 4.C.
WaRninG
ChanGinG sUsPension adJUstment Can
ChanGe the handlinG and BRakinG
ChaRaCteRistiCs of yoUR BiCyCle.
Never change suspension adjustment unless
you are thoroughly familiar with the suspension
system
manufacturer’s
instructions
and
recommendations, and always check for changes
in the handling and braking characteristics of the
bicycle after a suspension adjustment by taking
a careful test ride in a hazard-free area.