Canon 2300N - ImageCLASS B/W Laser Reference Manual - page 77
Specifying Common Settings
3-10
Selecting and Stor
ing Settings
3
1
Press [Additional Functions]
➞ press [F3] (▼) or [F4] (▲) to
highlight
➞ press [OK].
The COMMON SETTINGS menu appears.
2
Press [F3] (
▼) or [F4] (▲) to highlight
AUTOCLEAR>
➞ press [OK].
Each time you press
(
▼) or
(
▲), the next or previous menu
option becomes highlighted.
The SW AFTER AUTOCLEAR menu appears.
3
Press [F3] (
▼) or [F4] (▲) to highlight
DFLT> or
➞ press [OK].
If you want to reset the machine to the default settings after auto clearing, select
. In this case, for example, if has been
selected in the 01 DEFAULT SETTINGS menu, the machine will be reset to the
initial fax menu when you perform auto clearing during setting the Copy function.
If you do not want to reset the machine to the default settings after auto clearing,
select . In this case, for example, if has
been selected in the 01 DEFAULT SETTINGS menu, the machine will be reset to
the initial copy menu when you perform auto clearing during setting the Copy
function.
The selected mode is set, and the COMMON SETTINGS menu returns.
F3
F4
Additional Functions
F3
F4
OK
F3
F4
OK
F3
F4
OK