Canon 2300N - ImageCLASS B/W Laser Setup - Install The Toner Cartridge.
Install the toner cartridge.
2 Slide out the left cover of the stack bypass.
1 Open the stack bypass.
3 Remove the toner cartridge from the bag.
Keep the bag in a safe place.
1
1
2
4 Hold the cartridge with both hands and slowly
shake it sideways 1 and then back and forth
2 to distribute the toner inside the cartridge.
5 Hold the cartridge on a flat stable surface with
one hand, and pull out the seal completely
with the other hand.
Tabs
Protective cover
1
6 Remove the tape holding the orange
protective cover, and pull the release tabs on
the cover to detach it from the cartridge.
IMPORTANT
●
Do not touch the blue-green drum surface inside
the toner cartridge.
7 Hold the cartridge by its handles (marked with
blue) and insert it in the machine horizontally
as far as it will go.
8 Close the left cover and the stack bypass.