Canon Color imageCLASS MF8170c Instructions Manual

Other manuals for Color imageCLASS MF8170c: Installation Instructions, Additional Instructions, Network Manual, Basic Manual, Instructions Manual, Remote Ui Manual, Specification

Manual is about: Canon imageCLASS MF8170c: Software Guide

Page of 8

Download

Print this page

Bookmark us

Set-Up Instructions

Thank you for purchasing Canon Color imageCLASS MF8170c.

To get your machine ready for use, please follow the instructions in this document before referring to any other documentation.

READ THIS FIRST

Unpack the machine and its components.

Check that you have the following:

●

Machine

●

Drum cartridge

●

Toner cartridges

(

Yellow

Magenta

Cyan

, Black)

●

Document feeder tray

●

Power cord

●

Telephone cable

●

USB cable

for the Machine

●

Destination labels

●

Manuals (Set-Up Instructions for the Machine, Set-Up

Instructions for Networking and Printing, Basic Guide,

Facsimile Guide)

●

User Software CD

●

Registration Card

●

Limited Warranty Note

●

Limited Warranty Note for EP-87 Cartridges

NOTE

●

For the list of software included in the User Software CD, see the Set-Up Instructions for Networking and Printing.

●

A nework cable is not included.

1 2 3 4 5 6 7 Next › »

Summary of Color imageCLASS MF8170c

Page 1
Set-up instructions set-up instructions thank you for purchasing canon color imageclass mf8170c. To get your machine ready for use, please follow the instructions in this document before referring to any other documentation. Read this first read this first unpack the machine and its components. Chec...
Page 2
Remove the shipping materials. Important ● for important safety instructions on installation and handling of the machine, see “important safety instructions” in the basic guide. 1 remove all the shipping tape and foam blocks on the outside of the machine. Document feeder tray important ● be careful ...
Page 3: Connect The Power Cord.
Connect the telephone cable. 1 plug the power cord into the rear socket ➊ . Then connect the other end to the wall outlet ➋ . Connect the power cord. Note ● the machine does not have a power switch. 2 the lcd displays install y/m/c/k cartridge and supply rec. Paper. The lcd returns to the standby di...
Page 4: Install The Drum Cartridge.
2 remove the drum cartridge from the bag. Keep the bag for storing the cartridge when the machine needs maintenance. 1 lift the scanning platform ➊ , and open the cartridge cover ➋ . 3 remove the shipping materials. Sensors protective shutter electrical contacts electrical contacts 4 remove the prot...
Page 5
2 rock the cartridge several times to distribute toner inside. 1 check the color marking on the cartridge receptacle in the machine. Remove the toner cartridge of the same color from the bag. Protective cover 3 remove the protective cover. Toner cartridge memory developing roller 4 hold the cartridg...
Page 6: Load Paper.
Load paper. 1 pull out the paper cassette completely. 2 turn and pull out the shipping material ➊ , and press the inner plate ➋ to set it on the bottom. Note ● if you do not completely insert the cassette into the machine, paper jams may occur. ● make sure the correct paper size is specified in the ...
Page 7: Set The Basic Fax Settings.
Set the basic fax settings. Important ● before sending a fax, you must register the current date and time, fax number, and unit name in the machine. Note ● for details on setting up the machine for the fax function, see the facsimile guide. ● for details on how to input characters, see chapter 2,“re...
Page 8
Manual: when an extension telephone is connected to the machine, you can receive faxes by pressing [b&w start] before hanging up the extension telephone. Note • the drpd mode requires subscription to a drpd service. For more information, contact your local telephone company. 4 press or ➋ to select ➝...