Canon DADF-Q1 Service Manual - page 115
of
156
Chapter 4
4-5
F-4-9
When mounting the reversing guide, do so while forcing it in the direction of the arrow. If not mounted properly, it can trigger jams.
F-4-10
3) Remove the ADF controller cover, and set the DIP switch (SW1) ADF controller PCB as follows.
F-4-11
4) Press the push switch (SW2) on the ADF controller PCB.
- The reversing assembly will start to operate.
F-4-12
5) Clean with lint-free paper moistened with alcohol.
F-4-13
4.2.4.4 Copyboard Glass
0011-2667
1) Wipe the copyboard glass of the copier with a cloth moistened with alcohol.
Screw
Screw
Reversal guide
[1]
J1
J2
J5
J3
J6
J7
J8
J9
J10
J16
J15
J11
J14
IC8
J13
J12
J4
CB1
SW1
DSP1
SW4SW3SW2