Canon imageCLASS MF5550 Setup Sheet - Set The Fax Receive Mode.
2
When you connect the machine, the following messages should appear in the LCD.
IMPORTANT
●
For important safety instructions on installation and handling of the machine, see p. xiii of the Basic Guide.
NOTE
●
Make sure the correct paper size is specified in the machine. For details, see p. 2-7 of the Basic Guide.
Set the fax receive mode.
1
Press [FAX] ➀.
2
Press [Receive Mode] ➁.
3
Press [
] or [
] ➂ to select the fax
receive mode.
Select from the following:
- to automatically receive faxes only. Voice calls will be
disconnected.
- for the machine to ring for fax and voice calls. Fax calls must be
answered manually.
-
answering machine connected to your machine.
- to distinguish between fax and voice calls by using Distinctive Ring Pattern
Detection.
4
Press [Set] ➃ to return to the standby mode.
NOTE
●
For details on fax receive modes, see p. 5-1 of the Facsimile Guide.
●
Before using your machine, you need to make sure it is set for your telephone line type.
For details, see p. 2-6 of the Facsimile Guide.
Approx. 7 seconds
4
1
2
3