Canon ImageCLASS MF5730 Setup Instructions - page 4
7 Even out the edges of the paper stack.
Make sure the height of the stack does not
exceed the limit marks
(A) and that
the side edges of the stack are below the
hooks (B).
9 Insert the tabs on the extension cover into the
slots
➊
on the back of the machine,
and carefully lower the cover
➋
until it sits on
the cassette extension beneath it.
B
A
8 Insert the paper cassette back into the
machine as far as it will go.
NOTE
●
If you do not completely insert the cassette into the
machine, paper jams may occur.
IMPORTANT
●
Do not push in the cassette at an angle. Doing so
may damage the paper sensing lever inside the
machine.
IMPORTANT
●
Do not load paper from the back of the machine.
Doing so may damage the paper feeding assembly
inside the machine.
E227ME (MF5730) US2 SI.qxd 2/1/05 11:57 AM Page 4