Concept Pro VXM4-4 User Manual - page 4

1

BEFORE INSTALLING

BEFORE INSTALLING

•

Installation should be carried out only by qualified personnel and in accordance with any 

electrical regulations in force at the time.

•

The DVR must be placed on a stable surface or mounted in an approved cabinet. Adequate 

ventilation must be provided, taking particular care not to block any of the air vents on the DVR.

•

Adequate protection against lightning strikes and power surges must be installed to prevent 

damage to the DVR.

•

Any safety warnings on the DVR and in these instructions must be adhered to.

•

If cleaning is necessary, shutdown the DVR and disconnect power first. Use a soft dry cloth only – 

never use any abrasive cleaners.

•

Do not attempt to service or repair the DVR as opening or removing covers may expose 

dangerous voltages or other hazards. Refer all servicing to qualified service personnel