Concept Pro VXM4-4 User Manual - page 9

6

CONFIGURING THE LIVE DISPLAY

CONFIGURING THE LIVE DISPLAY

MULTI SCREEN MODE

3 different display modes are supported by the 4 channel VXM4.

By repeatedly pressing the 

SCR MODE

button, the operator can choose between single screen, quad

screen and basic sequence.

All the display modes are static with the exception of the sequence mode. In this mode, the sequence

symbol (

) is displayed and each channel is shown in full screen for a set period of time (default

3 seconds) before switching to the next channel. The sequence runs indefinitely until a different

display mode is chosen

To view a particular channel in full screen, press the corresponding 

CHANNEL SELECTION

button.

Pressing the same 

CHANNEL SELECTION

button again will switch the display back to the last

selected multi screen mode.

CHOOSING CHANNELS