Connexx ConnexxAir User Manual - page 12
12
Draft | english | 2016-12-13
The connection is automatically established:
As soon as the connection to the PC could be
established, the middle LED shines green for
3 seconds, then starts flashing.
If the middle LED flashes slowly (once every
3 seconds), the connection to the hearing
instruments could not be established.
Refer to section "Troubleshooting".
If the middle LED flashes quickly (once
per second), the connection to the hearing
instruments is established.
ConnexxAir is ready for programming the
hearing instruments.
When left or right LED flash green
, data are
transferred to the respective hearing instrument.
Further information
■
Use only the supplied dongle.
■
Dongle and ConnexxAir need to be within a range of
10 m (32 ft).
■
If the connection to the PC or to the hearing
instruments could not be established, refer to section
"Troubleshooting".
■
If you replace the dongle with a new one, or if you
use the dongle with another PC, you may have to pair
dongle and ConnexxAir manually. This is done by
shortly pressing the pairing button.