Connexx ConnexxAir User Manual - Programming On The Table
of
29
15
Draft | english | 2016-12-13
Programming on the table
If you want to pre-configure the hearing instruments you
can also have ConnexxAir and the
hearing instruments lying on the
table.
When programming on the table:
X
Place the hearing instruments
along the neckloop (refer to the
picture).
X
Keep a minimum distance
of 3 cm (1.2 inches) between the two hearing
instruments.
X
Keep a distance of 5 to 10 cm (2 to 4 inches) between
each hearing instrument and ConnexxAir.
During the programming process ConnexxAir
can reach other hearing instruments outside the
neckloop.
X
Keep a minimum distance of 1 m (40 inches) to
other hearing instruments.